The project
Concept and process design
The chain of 10 areas is set, and the mass balance closes within 1 %.
- Basis of design
- Process chain with mass balance
- Timing of one batch
Equipment selection
Every device is a current catalogue product. Large machines are black boxes with real connections.
- Equipment catalogue with lifecycle evidence
- Device gap analysis per area
- List of black-box machines
Control and safety design
Each area and vehicle gets one PLC and a safety concept. Handshakes are defined.
- Control architecture
- Signal list per area
- Safety concept per area
Device models
Each device is modelled from its datasheet and tested, 113 also live against the PLC.
- 186 device models
- 113 live test stands
- Critical device reviews
PLC programming
Device drivers are programmed and unit-tested. Each area has its own program, and most are already tested against their 3D scene.
- Device library: 1,937 tests passed
- PLC design per area
- Area programs for all 10 areas
Documentation
Each area has a full specification. Each product has a real device checklist.
- Specification per area
- Real device checklist, 2,528 items
Virtual commissioning, area by area
The code is tested bottom-up: devices done, 2 areas closed, 4 areas in test.
- Device level done
- 10 of 10 area scenes built
- 2 areas closed, 4 in test
- Fault test per area
Shipment and installation
In the story, the machinery flies to 16 Psyche and is installed area by area.
Start of production
In the story, the real start-up needs only fine tuning, and the first ingots are cast.
The project in numbers
The project scope
- Process and logistics design: 10 areas, mass balance, racks, yard and tower.
- Equipment: current catalogue products and 24 black-box machines.
- Control, safety and digital twin: 14 PLCs, device models, virtual commissioning.
- Not in scope: refinery internals, the cargo ship and the flight.